User Manual
Important Notice
- Make sure to check the use-by date indicated on the kit box.
- DO NOT DRINK the stabilization buffer.
- In the event of the stabilization buffer coming into contact with your eye or skin, wash thoroughly with water.
- Keep out of reach of children.
REMEMBER!
- Refrain from brushing your teeth, smoking, eating, and drinking (including water) for at least 30 minutes before saliva collection.
- You can access your test results only after kit registration.
- Please register your kit on Genoplan website or app.
Follow the instructions under 2. Register your kit. - Once saliva collection is complete, return the sample to Genoplan laboratory as soon as possible.
1. Take a picture of your serial key
Take a picture of your serial key for recording purpose.
*You need to enter the serial key for kit registration in order to get access to your results.
2. Register your kit
- Click 'Kit Registration' button below and create a Genoplan account.
- After logging in, register your kit by entering the 12-letter serial key printed on the saliva collection tube.
*The genetic analysis will start only when the kit registration is complete.
3. Rub the insides of your mouth
Rub the insides of your mouth with your tongue 5 times to collect enough buccal cells.
4. Rub your gums
Rub the inner and outer sides of your gums with your tongue 5 times.
5. Collect saliva
Spit into the saliva collection tube up to the indicated line. Please note that foamy saliva DOES NOT count.
*If you have collected too much saliva, slightly tilt the tube and discard the saliva until the remains reach the indicated line.
6. Remove the funnel
Turn the funnel counterclockwise and remove it from the tube.
Precaution
- Prepare tissue paper before removing the funnel.
- The buffer solution and your saliva will mix when you remove the funnel.
- When removing the funnel, the saliva may sink below the indicated line. This is acceptable and no additional saliva is needed to be collected after removing the funnel.
7. Screw on cap
Remove the screw cap at the bottom of the tube and close the opening of the tube with it.
You may rest assured that removing the screw cap from the tube won't affect the content in the tube in any way.
8. Shake well
Shake the tube 5 to 7 times and mix your saliva with the stabilzation buffer.
9. Seal tight
Place the tube inside the white bag and seal tight.
10. Return your sample
You can choose to send your sample via SingPost or DHL Singapore. We recommend to send via us.
Return via SingPost
Beyond Geno
7030 Ang Mo Kio Avenue 5
#09-46
Singapore 569880
Return via DHL Singapore
If you prefer to send via DHL Singapore, please refer to Genoplan official guide here.
11. View your report
A notification will be sent to you once your genetic analysis reports are ready.
Access your reports on Genoplan website or app.
